|
This includes list of communication network protocols used for process or industrial automation, building automation, substation automation, automatic meter reading and vehicle automation applications ==Process automation protocols== * AS-i – Actuator-sensor interface, a low level 2-wire bus establishing power and communications to basic digital and analog devices *BSAP – Bristol Standard Asynchronous Protocol, developed by Bristol Babcock Inc. *CC-Link Industrial Networks – Supported by the CLPA *CIP (Common Industrial Protocol) – can be treated as application layer common to DeviceNet, CompoNet, ControlNet and EtherNet/IP *Controller Area Network utilised in many network implementations, including CANopen and DeviceNet *ControlNet – an implementation of CIP, originally by Allen-Bradley *DeviceNet – an implementation of CIP, originally by Allen-Bradley *DF-1 - used by Allen-Bradley PLC-5, SLC-500, and MicroLogix class devices *DirectNet – Koyo / Automation Direct proprietary, yet documented PLC interface *EtherCAT *Ethernet Global Data (EGD) – GE Fanuc PLCs (see also SRTP) *EtherNet/IP – IP stands for "Industrial Protocol". An implementation of CIP, originally created by Rockwell Automation *Ethernet Powerlink – an open protocol managed by the Ethernet POWERLINK Standardization Group (EPSG). *FINS, Omron's protocol for communication over several networks, including ethernet. *FOUNDATION fieldbus – H1 & HSE *HART Protocol *HostLink Protocol, Omron's protocol for communication over serial links. *Interbus, Phoenix Contact's protocol for communication over serial links, now part of PROFINET IO *MACRO Fieldbus - "Motion and Control Ring Optical" developed by Delta Tau Data Systems. *MECHATROLINK – open protocol originally developed by Yaskawa, supported by the (MMA ). *MelsecNet, supported by Mitsubishi Electric. *Modbus PEMEX *Modbus Plus *Modbus RTU or ASCII or TCP *OSGP – The Open Smart Grid Protocol, a widely use protocol for smart grid devices built on ISO/IEC 14908.1 *Optomux – Serial (RS-422/485) network protocol originally developed by Opto 22 in 1982. The protocol was openly documented and over time used for industrial automation applications. *PieP – An Open Fieldbus Protocol *Profibus – by PROFIBUS International. *PROFINET IO *RAPIEnet – Real-time Automation Protocols for Industrial Ethernet *Honeywell SDS – Smart Distributed System – Originally developed by Honeywell. Currently supported by Holjeron. *SERCOS III, Ethernet-based version of SERCOS real-time interface standard *SERCOS interface, Open Protocol for hard real-time control of motion and I/O *SSCNET, Servo System Controller Network by Mitsubishi Electric for control of motion and I/O *GE SRTP – GE Fanuc PLCs *Sinec H1 – Siemens *SynqNet – Danaher *TTEthernet – TTTech *MPI – Multi Point Interface 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「List of automation protocols」の詳細全文を読む スポンサード リンク
|